Air Quality Testing Guides for Your Home

You can track humidity and particles at home with a monitor, but only a lab sample tells you whether there’s mold in the air or asbestos in your materials. These guides, written by our inspectors in Ontario and Quebec, cover when a kit is enough, what a professional test finds, what it costs and how to read the results.

🧪

A home kit can flag a problem, but only a lab can confirm it

Short answer: a monitor or kit is fine for watching humidity, CO2 or particles over time. For mold you need an air sample counted by an accredited lab and compared with an outdoor sample taken the same day. For asbestos, a small piece of the suspect material goes to the lab. Our mold air test is CAD 550 plus tax with the outdoor baseline included, asbestos is CAD 430 for the first material, and lab results take 3 to 5 business days.

Home kit or monitor

Shows a trend

  • Humidity, CO2 and particle readings you can watch for weeks
  • Settle-plate mold kits catch what falls onto a dish, not what’s in the air
  • Usually no outdoor sample to compare with
  • Can’t identify asbestos at all

Professional lab test

Answers the question

  • A measured volume of air, inside and outside
  • Spores counted and named by an accredited lab
  • Suspect materials checked for asbestos under a microscope
  • A written report you can hand to an insurer, landlord or buyer

Our take: keep the monitor for everyday humidity. Book a test when someone has symptoms, you’re buying a home, or you’re about to open a wall or sand an old ceiling.

Honestly, a lot of homes don’t need a sample at all. Health Canada’s advice is to find and fix the moisture first, and it sees an air test as useful when a concern stays unexplained after an inspection (Addressing moisture and mould in your home). For asbestos, Health Canada says material left intact isn’t a significant risk; the fibres come loose when it’s disturbed (Asbestos and your health). So our rule of thumb is simple: in a building put up before 1990, test before you drill, sand or demolish.

People call asking for a test, and sometimes that’s the right call. But the first thing I want to know is where the water’s been. If a moisture reading already explains it, fix the leak and keep your money. The sample’s for when it doesn’t.

Andrey Golubev Andrey Golubev Senior Indoor Environmental Inspector · Certified Mold Inspector (CMI) · Two decades of mold inspections

Looking for a quick answer instead of a full guide? Our air quality testing FAQ answers 33 common questions on cost, results, mold and asbestos.

🏠

Start with what’s actually in your air

Most indoor air problems come down to moisture, ventilation and what’s already in the house. These guides cover the basics before anyone takes a sample.

Want a measured answer for your own home instead of a general one? That’s our home air quality testing.

🔬

Mold is where most of our calls start

A musty smell, a stain that keeps coming back, a basement that flooded once. Here’s when to test, how to read a lab report and how to pick who does it.

Ready to find out? See mold testing, or mold inspection and testing in Ottawa.

🔑

Buying or selling puts a deadline on the answer

A home inspector’s “recommend further testing” note doesn’t leave much time before conditions expire. These two guides cover what to test and when.

Short on time? Call us about air quality testing before you buy and tell us your conditions date.

💵

What testing costs, sample by sample

Our prices are published: CAD 550 plus tax for a mold air test with an outdoor baseline, CAD 260 per extra sample, and CAD 430 for the first asbestos material. The guides show how a total adds up.

Want a number for your home? Tell us what you’ve noticed and we’ll confirm the sample count before you book.

📟

Kits and monitors tell you less than the box says

Monitors are good at trends: humidity, CO2, particles over weeks. They can’t name a mold type or find asbestos. These reviews say where each one is worth the money.

Where a monitor stops, a lab sample starts: see how our mold testing works.

🏢

Offices and commercial buildings need a different plan

More people, bigger ventilation systems and complaints that come from one floor but not another. These guides are for managers and owners.

For a building with staff or tenants, see commercial air quality testing.

Still not sure whether you need a test?

Call 1-866-528-2897 any time, 24/7, and describe what you’ve noticed. If a test won’t tell you anything new, we’ll say so. Inspections run Monday to Friday, 8:00 AM to 5:00 PM, across our service areas in Ontario and Quebec.

Last updated: 21 November 2026

Call nowBook a test